Wireless Power Transfer System with Constant Voltage/Constant Current Output Performance
Main Article Content
Abstract
Aiming at the problem of unstable output voltage and output current caused by load fluctuation, this paper starts from the perspective of system topology and control strategy for analysis. First, the output characteristics of LCL-S (inductor-capacitor-inductor and series), LCL-P (inductor-capacitor-inductor and parallel), LCL-LCL (inductor-capacitor-inductor and inductor-capacitor-inductor), and LCL-LCC (inductor-capacitor-inductor and inductor-capacitor-capacitor) compensation topologies are analyzed. Combining the advantages of LCL-S and LCL-LCL compensation topology output characteristics, an LCL-LCL/S compensation topology is constructed, and its topology is optimized. Then the influence of parasitic resistance on the output characteristics of LCL-LCL/S compensation topology is derived. A control strategy of primary side regulation is proposed to address the issue of unstable output voltage and current caused by parasitic resistance in the system under variable loads. This method can effectively improve the stability of the output voltage and output current of the wireless power transfer system in the LCL-LCL/S compensation topology under load fluctuations. Finally, a set of experimental prototypes is built to verify the correctness of the theoretical analysis.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
References
M. R. Gholipour, M. Saradarzadeh, S. Farhangi, "Wireless power transfer pulse charging of lithium-ion battery", Journal of Energy Storage, vol. 72, no. Part B, pp. 108402, 2023.
N. Ramsaroop, O. O. Olugbara, "Wireless Power Transfer Using Harvested Radio Frequency Energy with Magnetic Resonance Coupling to Charge Mobile Device Batteries", Applied Sciences, vol. 11, no. 16, pp. 7707, 2021.
X. L. Chang, P. S. Chee, E. H. Lim, "Compact conformal tattoo-polymer antenna for on-body wireless power transfer", Scientific Reports, vol. 13, pp. 9678, 2023.
E. S. Dyachkova, E. A. Mindubaev, A. A. Danilov, "Study of the Power Characteristics and Safety of a Wireless Power Transfer System for Power Supplies for Medical Equipment in Operating Rooms", Biomedical Engineering, vol. 56, no. 3, pp. 204-207, 2022.
D. McEneaney, O. Escalona, A. Bosnjak, M. Karim, P. Crawford, J. McLaughlin, "A Novel Wireless Power Transmission System for Left Ventricular Assist Devices", Journal of Heart and Lung Transplantation, vol. 42, no. 4, pp. S183, 2023.
W. Liu, C. Hu, L. Xiang, "A Multimodal Modulation Scheme for Electric Vehicles' Wireless Power
I. Bentalhik, A. Lassioui, H. EL Fadil, T. Bouanou, A. Rachid, Z. EL Idrissi, A. M. Hamed, Analysis, "Design and Realization of a Wireless Power Transfer Charger for Electric Vehicles: Theoretical Approach and Experimental Results", World Electric Vehicle Journal, vol. 13, no. 7, pp. 121, 2022.
K. Qiao, E. Rong, P. Sun, X. Zhang, J. Sun, "Design of LCC-P Constant Current Topology Parameters for AUV Wireless Power Transfer", Energies, vol. 15, no. 14, pp. 5249, 2022.
K. Detka, K. Górecki, "Wireless Power Transfer-A Review", Energies, vol. 15, no. 19, pp. 7236, 2022.
M. T. Tran, S. Thekkan, H. Polat, D. D. Tran, M. El Baghdadi, O. Hegazy, "Inductive Wireless Power Transfer Systems for Low-Voltage and High-Current Electric Mobility Applications: Review and Design Example", Energies, vol. 16, no. 7, pp. 2953, 2023.
Y. Yamada, S. Hasegawa, T. Imura, Y. Hori, "Coil Design Method Considering Power, Efficiency, and Magnetic Field Strength of Coreless Coils Using Numerical Analysis in Wireless Power Transfer", IEEJ Transactions on Electrical and Electronic Engineering, vol. 18, no. 8, pp. 1360-1370, 2023.
Z. Shen, H. Zhou, H. Tang, X. Mao, Y. Zhang, "Reconfigurable topology of electric vehicle wireless power transfer system to achieve constant-current and constant-voltage charging based on multiple windings", Energy Reports, vol. 9, no. S10, pp. 1220-1226, 2023.
L. Yang, X. Yu, Y. Shi, M. Wang, "A four‐coil structure wireless power transfer system with constant current and constant voltage charging: Analysis, design, and experiment", International Journal of Circuit Theory and Applications, vol. 51, no. 1, pp. 32-46, 2023.
W. Gong, J. Xiao, S. Han, X. Wu, N. Wu, S. Chen, "Research on robot wireless charging system based on constant-voltage and constant-current mode switching", Energy Reports, vol. 8, no. S4, pp. 940-948, 2022.
W. Liu, L. Lin, M. Tian, C. Xu, W. Zhang, "Research on output characteristics of wireless power transmission power source based on transforming network", The Journal of Engineering, vol. 2019, no. 16, pp. 2890-2892, 2019.
Y. Zhou, M. Qiu, Q. Wang, Z. Ma, H. Sun, X. Zhang, "Research on Double LCC Compensation Network for Multi-Resonant Point Switching in Underwater Wireless Power Transfer System", Electronics, vol. 12, no. 13, pp. 2798, 2023.
Y.G. Su, Z.Q. Yan, H.S. Hu, Y. Sun, Z. Liu, S.B.Y. Liu, "Electric-Field Coupled Power Transfer System with Constant Current / Constant Voltage Output Characteristics Based on Frequency Switching", Proceedings of the CSEE, pp. 1-13, 2023.
Y.S. Yao, M. Zeng, G. Li, Y.J. Wang, "Switching method from constant current mode to constant voltage mode for wireless power transfer system", Electric Machines and Control, vol. 27, no. 06, pp. 8-17, 2023.
W.C. Huang, X.Y. Jiang, Y.F. Chang, H.D. Tan, S.H. Zhu, "Anti-offset method for WPT systems based on constant voltage output in-terval tracking", Journal of Power Supply, pp. 1-13, 2023. http://kns.cnki.net/kcms/detail/12.1420.TM.20230112.1722.002.html
Y.H. Chen, Y.Y. Li, B. Yang, Y. Chen, R.K. Mai, "Constant-current/Constant-voltage Output Method for Wireless Power Transfer System Based on Multi-relay Coil Structure", Automation of Electric Power Systems, vol. 46, no. 20, pp. 147-154, 2022.